Disclaimer All material in these articles are digitally scanned from the originals. Permission to disseminate this information was obtained from the authors by Peter Eaton, WB9FLW. No copying, changing of the digital format or reprinting may be done on this material without the permission of the original authors and John Mc Clun, N3REY. You may make a copy of all articles for personal use only. Any and all spelling errors may or may not be from the process of scanning. If an article has been spell checked, the original misspelling will have been corrected. Those that are present currently are due to NOT having been completely checked. Any omission of content will be corrected as time allows, the current presentations are being made available until corrected copies are obtained. Please address all comments to the digital librarian, John McClun, N3REY at mcclun@clark.net COHERENT CW NEWSLETTER (Copyrighted March, 1975) CCWN 75:1 THE EDITOR M. I. Chas. E. Woodson, 2301 Oak St., Berkeley, CA 94708, is the new editor of CCW Newsletter. Woody, W6NEY, is a professor at the University of California and operates mostly CW on 40,20, and 15 when he isn't building things in his laboratory. He also has a Japanese licence and operates from Japan during his frequent professional trips to Japan CALL FOR NEWS All interested parties are requested to send news to the editor. SUBSCRIPTIONS Subscriptions to CCW Newsletter are $5 per year. We anticipate at least 80 pages per year, issued irregularly. Persons who make contributions will be considered as having indicated their interest and the subscription will be waved. DEFINITION OF COHERENT CW The technique of sending and receiving information in a binary code (e.g., Morse code) in such a way that the frequency,pulse length, and pulse phase are known and used in the demodulation of the information transmitted. (Please send the editor your comments on this definition.) BIBLIOGRAPHY The editor is compiling a bibliography of references relevant to CCW. Please send your suggestions for it. OPERATING PROCEDURES The following procedure for calling CW by CCW is suggested: a 30 second string of dots followed by CQ DE W6HAM. The dots allow the receiving operator to adjust the phase of his detector and also indicate CCW is being used. CONTRAST BETWEEN PHASE-LOCK LOOPS AND CCW Phase-lock loops appear to be very effective when the noise and interference is random. When non-random QRM signals stronger than the desired signal are in the bandpass, the phase-lock loop will lock on the QRM. STANDARDS FOR CCW OPERATION For the time being, the following standards are suggested. Operating frequency: 3,550,Q00 cycles, + 3 cycles. Bit (dot) length: .1 second. This results in a code speed of approximately 12 w. p. m.